How to Accept an Insulation Superstore Delivery and Report Damage
How to prepare access for an Insulation Superstore delivery, inspect bulky insulation before signing, and avoid an unchecked signature that treats the goods as accepted in good condition.

Disclosure: This page may contain affiliate links. They do not influence our editorial conclusions. Read the disclosure.
Our pick
- See price at Insulation Superstore
Top pick
Insulation Superstore
Insulation Superstore is a UK insulation and plasterboard retailer operated by CMO SUPERSTORES LTD. Official pages say the site launched in 2015, list more than...
What this guide covers
How to Accept an Insulation Superstore Delivery and Report Damage
Insulation and plasterboard orders are awkward to receive. Packs can be long, heavy, and compressed; boards can be 2400mm by 1200mm; and official policy allows some larger orders to be left at the kerbside. Insulation Superstore's transport policy, dated 8 December 2025, also treats an "unchecked" signature as acceptance that the goods arrived in good condition, and it can levy a failed-delivery charge if a driver cannot get in. This how-to explains how to prepare the site, inspect before you sign, and start a problem report. It is not a lifting guide, and it is not a substitute for the manufacturer's installation instructions.
Policy background is in the shopping guide. Official packed-size advice for a loft hatch appears on the Knauf Loft Roll 44 200mm page.

Step 1: Describe the access, and do not book the fitter first
Before you pay, tell sales@insulationsuperstore.co.uk or 01752 692 206 if the road is narrow, if there are height or width limits, if parking is restricted, or if a lorry cannot wait. The transport policy asks for that disclosure and reserves the right to refuse delivery, or to charge for a failed attempt, if a driver cannot get in. Scottish Highlands and Islands addresses can also carry extra charges, which should be confirmed before the order is processed. Product pages repeat that not every line incurs the extra amount, because the cost comes from the manufacturer, distributor, or courier.
Measure the route from the kerb to the loft hatch or storage space. A customer asked whether a Knauf Loft Roll 44 200mm pack would fit a 60 by 40 centimetre hatch. The official answer was that the company did not have exact packed dimensions, that the compressed pack should fit, and that you should unroll it only once it is in the loft. That answer is useful, but it is not a measured guarantee. If your hatch is smaller, or if you are receiving 2400mm PIR boards, plan a path that does not depend on bending a board in a stairwell. Celotex GA4050 is listed at approximately 5.53 kilograms per board and 2400mm by 1200mm; that is a two-person carry for many hallways, and official Q&A on that page said the board is not a finished surface and should be covered, for example with plasterboard, in living areas.
Because many lines are drop-shipped, one checkout can arrive as several vehicles on several days. A mixed basket can also lose next-day timing if a 24-hour item is combined with a slower one. Do not book a fitter, and do not strip an existing loft, until the packs you need are actually on site. Orders placed after midday on Friday are processed on Monday.
Step 2: Inspect the packs before you sign, and avoid an "unchecked" ticket
On the day, be present if you can. Kerbside delivery means the driver may not carry packs through the house or up a loft ladder. Have a dry, clean place to stack them off the ground. Count the packs against the delivery note. For mineral wool, look at the plastic wrap for tears, wet patches, or crushed ends. For PIR boards, look for broken corners, punctured foil facings, and water damage. The Celotex GA4050 listing describes a low-emissivity foil facing as part of the thermal performance; a torn facing is worth photographing even if the foam still looks intact.
Sign only after that check. Official transport language treats an unchecked signature as confirmation that the goods were received in good condition, and risk passes on delivery. If you cannot inspect a wrapped pallet properly, write that you are signing for the number of packages only and that condition is unchecked, and add photographs before the vehicle leaves. If the damage is obvious, refuse the damaged lines rather than hoping a later email will unwind an unchecked acceptance. If a driver cannot complete the drop because of access, a failed-delivery charge may follow; that is why the access conversation belongs in step 1.
Step 3: Report problems quickly, and keep unopened packs if you may cancel
If something is missing, wet, or broken, contact the company in writing with the order number and photographs, using sales@insulationsuperstore.co.uk or the returns contacts published on official CMO pages, including feedback@cmostores.com. Do not install a damaged pack and then try to treat it as a change-of-mind return. Consumer change-of-mind rights, where they apply, run for 14 days from delivery, with 14 days to send the goods back, and the customer pays return costs unless the goods are faulty or misdescribed. Deductions can apply if handling reduced the value contrary to manufacturer instructions. Special-order lines may be non-returnable.
Store unused packs in the dry, still wrapped, until you know the quantity is right. Loft-roll coverage figures such as 6.84m2 per 200mm pack are official starting points, not a reason to open every roll on day one. If a later pack in a split shipment is delayed, you still have time-sensitive cancellation and inspection clocks on the packs that already arrived. Keep the delivery notes together.
The official loft-installation advice pages on the Insulation Superstore site are the right place to read about target depths, ventilation gaps, and how to lay rolls between joists. They are not a reason to ignore the delivery rules in this how-to. A well-planned install still fails if the first lorry is sent away, if wet packs are signed through as unchecked, or if a split shipment leaves you a pack short on the morning the fitter arrives. Read both sets of documents, and keep the sales phone number, 01752 692 206, and the order confirmation where you can reach them while the vehicle is still on site.
Weather is another practical limit the policy pages do not dwell on. Mineral wool wrap and PIR foil facings should not sit in standing water on a drive. If you cannot move the goods inside at once, you need a dry temporary store, not an "unchecked" signature and a hope that overnight rain will not matter. Photograph the stack as left, especially on a kerbside drop, so that a later damage report has a time-stamped starting point.
If the delivery arrives after you have already started work, stop and count again before you cut a short pack into a last bay. A missing board from a later drop-shipment cannot be replaced by stretching a mineral-wool roll, and a board that arrived with a punctured foil facing should not be buried in a floor build-up because the rest of the job is waiting. Photograph, email, and wait for a written replacement plan. The 14-day consumer clock and any damage report both run from delivery, not from the day the fitter happens to open that particular pack.
Business buyers should also remember that the terms give them a narrower set of rights than the consumer cooling-off summary in this how-to. If the invoice is in a company name, do not rely on the 14-day narrative without reading the business terms. If the invoice is in a household name, keep it that way in the company's records so a later return is not argued as a trade sale.
To place an order, use /go/insulationsuperstore or the official site, confirm carriage and access, and only then set a date with a fitter. A Knauf versus Celotex comparison can help you decide which packs you are actually waiting for.
References
- Transport Policy, dated 8 December 2025, accessed November 18, 2026
- Terms and Conditions of Supply, dated 17 June 2026, accessed November 18, 2026
- Knauf Insulation Loft Roll 44 (Combi-cut) 200mm - 6.84m2 Pack, accessed November 18, 2026
- Celotex GA4050 General Purpose PIR Insulation Board, accessed November 18, 2026
- How to install loft insulation, accessed November 18, 2026
Meet your guide
Lipeiguan
author